On-site Geofence

On-site Geofence

The Geofence settings allow administrators to restrict work order actions to technicians who are physically within the configured site location.

Geofence Settings

Section / OptionDescription
On-site geofenceControls whether work order actions are restricted based on the technician's location.
Require on-site locationWhen enabled, mobile users must be within the configured site radius to perform certain work order actions and checklist execution.
Enable / DisableTurns the on-site location restriction on or off.
RadiusDefines how close the technician must be to the work order's site to be considered on-site.
CurrentDisplays the currently configured geofence radius.
Radius RangeThe radius can be configured between 20 m and 1000 m.

Geofence Workflow

Open Settings
      ↓
Select Geofence
      ↓
Enable Require on-site location
      ↓
Set Required Radius
      ↓
Save / Apply Settings
      ↓
Technician Performs Work Order Action
      ↓
System Checks Technician Location
      ↓
Within Configured Radius → Action Allowed
      ↓
Outside Configured Radius → Action Restricted