Optimo Overview

Cloud and mobile maintenance management for intelligent buildings, connected to live building-system data.

About Optimo

Optimo is an enterprise maintenance and operations platform built for intelligent buildings. It brings assets, the field workforce, preventive maintenance schedules, helpdesk tickets, vendor contracts and live building-system telemetry into one cloud and mobile platform.

Platform at a glance

  • Web console for facility managers and executives, with role-based dashboards.
  • Native mobile apps for Android and iOS that work offline and sync when the device reconnects.
  • An AI Copilot that classifies tickets, assigns the right trade and assists technicians.
  • Native connection to building systems over BACnet/IP, Modbus TCP/RTU, OPC-UA and MQTT.
  • Deployment in the cloud or on-premise.

Modules

Optimo is organised into nine modules. The table shows what each one covers and where to read about it in these docs.

ModuleWhat it coversDocumentation
AssetsAsset register, lifecycle, warranty, condition, QR and NFC tagsAssets, Locations, Categories
MaintenancePreventive, corrective and predictive maintenance, work ordersWork Orders, Tasks, Checklists, Inventory
HelpdeskRequests, incidents, complaints and SLA trackingRequest
WorkforceTechnicians, shifts, skills and workloadPeople
Soft ServicesHousekeeping, cleaning, waste, pest control and landscapingCovered through Checklists and Tasks
Vendors and ContractsAnnual maintenance contracts, vendor compliance, SLA and performanceVendors
Energy and SustainabilityEnergy telemetry, carbon accounting and ESG reportingNot yet documented
IoT and Building SystemsBACnet and Modbus connectivity, alarms, automated work ordersIntegrations
AnalyticsExecutive KPIs, dashboards, reliability metrics and benchmarkingOverview dashboards, Reports

Module capabilities

Assets

A central registry that places equipment in one hierarchy and tracks it through its lifecycle.

  • Multi-level hierarchy: enterprise, campus, building, floor, zone, system, asset and sub-component.
  • QR code and NFC tagging, with camera scanning in the mobile app.
  • Condition scoring from 1 to 100, derived from live runtime, vibration and temperature data.
  • Warranty tracking with alerts 90, 60 and 30 days before expiry.
  • Lifecycle cost analysis covering total cost of ownership, CAPEX, OPEX, depreciation and residual value.
  • Attached documentation such as OEM schematics, O&M manuals, warranty certificates and wiring diagrams.

Maintenance

  • A preventive maintenance engine with calendar, runtime-hour and sensor-threshold triggers.
  • Corrective work orders generated automatically from building-system alarms.
  • Predictive maintenance that forecasts mechanical failure.
  • Digital SOP checklists with step-by-step safety protocols, including lock-out/tag-out.
  • Parts and inventory reservation tied to active work orders.
  • Mean Time to Repair (MTTR) and Mean Time Between Failures (MTBF) tracking per asset class.

Helpdesk

  • Ticket intake through the occupant mobile app, QR stickers, a tenant portal and email.
  • SLA escalation with countdown timers and manager escalation on potential breaches.
  • AI triage that sets urgency, tags the equipment category and assigns the engineering trade.
  • Status updates sent to occupants by SMS or push notification.
  • Satisfaction surveys on ticket closure, with sentiment trends.
  • Comfort complaints (hot or cold) linked to the zone temperature sensor.

Workforce

  • Shift planner with multi-trade coverage checks for electrical, plumbing, HVAC and BMS.
  • Skills and certification matrix, so hazardous or high-voltage work goes only to certified staff.
  • Workload balancing across the team.
  • Geofenced clock-in and clock-out on iOS and Android.
  • Productivity metrics: completion velocity, first-time fix rate and safety score.
  • In-app collaboration with voice notes, team chats and remote video assistance.

Soft Services

  • QR-verified cleaning audits, where cleaners scan door tags to log sanitisation times and supply replenishment.
  • Demand-based cleaning triggered by people counters and restroom traffic sensors.
  • Waste and recycling audits that track wet, dry and electronic waste.
  • Pest control logs covering bait stations, chemical application dates and vendor compliance.
  • Landscaping and irrigation schedules linked to weather forecasts.
  • Tenant feedback kiosks that alert cleaning supervisors immediately.

Vendors and Contracts

  • Central repository for annual maintenance contracts: scope of work, visit frequency, rate cards and renewal countdowns.
  • Vendor scorecards for on-time arrival, response SLA, ratings and quality.
  • A restricted mobile portal so external technicians can complete work orders securely.
  • Notifications before insurance, safety indemnity and licence expiry.
  • Digital job-card sign-off and service reports attached to invoice approvals.
  • Automatic penalty calculation when contractual response times are missed.

Energy and Sustainability

  • Two-way sync with Bacsys EMS and power meters, showing kW, kWh and power factor per asset.
  • Degradation alerts when a pump or chiller uses more than 15% above its baseline kWh.
  • Carbon accounting that converts electricity, gas, water and chilled-water use into Scope 1 and 2 CO2e.
  • ESG reports for LEED, BREEAM, GRESB and local sustainability requirements.
  • Peak load shedding that sets back non-critical assets during peak tariffs.
  • Lifecycle carbon tracking that compares preventive maintenance with equipment replacement.

IoT and Building Systems

  • Direct connection to the Bacsys Arcos platform and to Tridium Niagara, Siemens, Honeywell, Schneider and Johnson Controls systems.
  • Alarm filtering and de-duplication, which groups related sensor events to prevent alarm floods.
  • Closed-loop clearing: when a technician closes the work order and values return to normal, the building-system alarm clears automatically.
  • Vibration, temperature, current and air-quality readings shown inside the field work order.
  • Synchronisation with Bacsys Apex Edge controllers for offline maintenance triggers.
  • Remote setpoint control for authorised supervisors.

Analytics

  • Role-based dashboards for executives, facility managers and technicians.
  • Maintenance cost per square foot or square metre, benchmarked across properties.
  • MTTR and MTBF reliability analytics.
  • An ageing-asset risk matrix that identifies equipment nearing end of life.
  • Scheduled report delivery as PDF or Excel.
  • Predictive budget modelling that shows how deferred maintenance affects repair and utility costs.

From alarm to resolved work order

Optimo turns a building-system anomaly into a verified repair in five stages.

  1. Anomaly detected. The BACnet or Modbus gateway reports that a reading, such as chiller bearing vibration, has passed its safe limit.
  2. Triage. The AI Copilot evaluates asset criticality, trade certification and technician availability, creates the work order and starts the SLA countdown.
  3. Dispatch. A push notification goes to the assigned technician's phone, with the work order, route and staged spare parts.
  4. Execution. The technician scans the asset QR or NFC tag, completes the checklist and records the repair, with or without a network connection.
  5. Clearing. When the work order is closed and the readings return to normal, the building-system alarm clears automatically.

How the platform connects

  1. Physical layer. Chillers, air handling units, pumps, electrical boards, elevators and meters, tagged with QR or NFC and fitted with vibration, temperature and power sensors.
  2. Edge and protocols. Bacsys Apex Edge and unitary controllers translate BACnet/IP, BACnet MSTP, Modbus RTU/TCP, MQTT and LoRaWAN into structured real-time data.
  3. Optimo core. Preventive maintenance logic, AI Copilot triage, inventory and SLA escalation policies, with a digital asset record and an automated work order scheduler.
  4. Touchpoints. Native iOS and Android apps for technicians, a web command center for facility managers, a self-service portal for tenants, and ERP connectors such as SAP.

Mobile apps

Two native apps are available for Android and iOS.

AppIntended usersHighlights
Optimo AppSupervisors, leads and inspectorsQR scanner, multi-photo attachments, asset audit workflows
Optimo LiteFrontline soft-services staffOne-tap task completion, low battery use, 15 languages, fully offline

Both apps share these capabilities:

  • Offline-first operation with automatic sync once the device reconnects, for work in basements and plant rooms without signal.
  • Camera scanning of QR codes and NFC tags to open schematics, warranty details and service history.
  • Voice-to-text work notes, which the AI Copilot formats into structured summaries.
  • Geofenced check-in, which confirms a technician is on site before a work order can be logged.

Download links:

Security and deployment

Optimo can be deployed in the cloud or on-premise. The product page states that the platform is SOC 2 Type II certified. See the Bacsys security page for details.

Explore the documentation

Note: This overview is based on the Optimo product page at bacsys.ai/optimo. Feature availability can vary by edition and release.